Crown Victoria V8-4.6L VIN V Flex Fuel (2006)
Ignition Coil: Service and Repair
IGNITION COIL-ON-PLUG
Exploded View
Removal and Installation
1. Disconnect the negative battery cable.
2. Remove the air cleaner outlet pipe.
3. Disconnect the electrical connector from the ignition coil-on-plug.
4. Remove the bolt from the ignition coil-on-plug.
-
To install, tighten to 10 Nm (89 lb-in).
5. Remove the ignition coil-on-plug.
6. To install, reverse the removal procedure.
