Crown Victoria V8-4.6L VIN W (2000)
a new cable on top of the body main wiring harness and secure it with wire ties. Do not cut into the wiring harness to remove the existing antenna lead in
cable. Tie back or insulate the old cable ends to keep them from causing noise.
1. Connect the antenna lead-in cable at the antenna isolator module.
2. Install the new antenna lead-in cable on top of the old one and secure it with wire ties.
3. Install the new antenna lead-in cable in the wiring harness conduit along the rocker panel.
4. Connect the antenna lead-in cable.