Crown Victoria V8-4.6L VIN W (2000)
7. Measure the brake disc thickness.
^
Replace the brake disc if not within specification.
8. Inspect the disc brake caliper. If leaks or damaged boots are found, disassembly is required.
9. Remove the pads and stainless steel slippers.
1
Remove the pads and verify thickness.
2
Remove the disc brake caliper anchor plate stainless steel slippers and discard.
10. Inspect the disc brake anchor plate assembly.
^
Check the guide pin boots for damage.
^
Check the guide pins for binding and damage.
^
Replace worn or damaged pins.
Installation
