Crown Victoria V8-4.6L VIN W (2000)
Parking Brake Control: Service and Repair
Removal
1. Disconnect the battery ground cable.
2. Release the parking brake control, using the parking brake release handle.
3. WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension
vehicle. This can be accomplished by turning off the air suspension switch located in the luggage compartment. Failure to do so can result
in unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during these operations.
Raise the vehicle on the hoist.
4. Pull the parking brake adjuster clip downward.
5. Apply the parking brake control fully.
6. Push upon the parking brake adjuster clip to lock the adjuster.
