Crown Victoria V8-4.6L VIN W (2000)
Engine Temperature Sensor: Description and Operation
The Cylinderhead Temperature Sensor:
^
is mounted into the wall of the cylinder head and is not connected to any coolant passages.
^
sends a signal to the powertrain control module indicating the cylinder head temperature.
-
If the temperature exceeds approximately 121°C (250°F), the powertrain control module disables four fuel injectors at a time. The powertrain
control module will alternate which fuel injectors are disabled every 32 engine cycles. The four cylinders that are not being fuel injected act as
air pumps to aid in cooling the engine.
-
If the temperature exceeds approximately 166°C (3300 F), the powertrain control module disables all of the fuel injectors until the engine
temperature drops below approximately 154°C (310°F).
^
If the engine reaches critical temperature, the following happens:
-
The coolant temperature gauge pointer will read fully hot at approximately 121 CC (250°F).
