Crown Victoria V8-4.6L VIN W (2000)
11.
Heat the entire length of the heat shrink tubing until the hot melted wax appears from both ends of the tubing (Figure 5).
12.
Reconnect connector C128 or C1033 (as applicable).
13.
Reconnect the battery and test the circuit for correct A/C operation.
PARTS BLOCK
WARRANTY STATUS:
Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
OPERATION DESCRIPTION
TIME
041911A
Replace A/C
0.9 Hr.
Clutch Relay
And Install
Diode (Includes
Time To Monitor
PIDS And Replace
Low Pressure
Switch If Necessary
Does Not Include
Time For Diagnosis
Outside Of TSB
Or Wiring Shorts)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
14N089
42
Disclaimer