Crown Victoria V8-4.6L VIN W (2000)
Hose/Line HVAC: Service and Repair
Condenser to Evaporator Line
REMOVAL
1. Perform the Refrigerant Discharging and Recovery Procedure.
2. Disconnect the condenser to evaporator tube from the A/C evaporator core. For additional information refer to the spring lock couplings
disconnect and connect general procedure. See: Coupler HVAC/Service and Repair/Spring Lock Coupling Connect and Disconnect Procedure
3. Disconnect the condenser to evaporator tube from the A/C condenser core and remove the condenser to evaporator tube.
INSTALLATION
1. To install, reverse the removal procedure.
-
Lubricate the O-ring seal with PAG compressor oil YN-12-C F7AZ-19589-DA or equivalent meeting Ford specification WSH-M1C231-B.