Crown Victoria V8-4.6L VIN W (2000)
Clock: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the RH instrument panel finish panel.
-
Disconnect the electrical connector.
3. Remove the electric clock.
1
Remove the screws.
2
Remove the electric clock.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
