ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Multiplex Communication Network <--> [Information Bus] > < Idle Air Control Valve <--> [Idle Speed/Throttle Actuator - Electronic]|Specifications|Page 3378

Crown Victoria V8-4.6L VIN W (2000)

Page 1
background image

Idle Air Control Valve: Service and Repair

REMOVAL

1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Remove the engine appearance cover.

3. Disconnect the Idle Air Control (IAC) valve electrical connector.

4. Remove the IAC valve hose.

5. Remove the IAC valve.

INSTALLATION

1. To install, reverse the removal procedure.

Multiplex Communication Network <--> [Information Bus] > < Idle Air Control Valve <--> [Idle Speed/Throttle Actuator - Electronic]|Specifications|Page 3378