Crown Victoria V8-4.6L VIN W (2000)
6. Remove the Evaporative (EVAP) Emissions canister with bracket assembly.
^
Remove the bolts.
^
Remove the nuts.
7. Disconnect the fuel vapor hose assembly elbow at the EVAP canister.
8. Remove the canister vent solenoid from the EVAP canister.
9. Remove the EVAP canister.
INSTALLATION
1.
To install, reverse the removal procedure.
^
leak test the system. For additional information, refer to Evaporative Emission System leak Test. See: Testing and Inspection/Component
Tests and General Diagnostics/Component Tests/Evaporative Emission System Leak Test
^
Carry out the evaporative emission repair verification drive cycle. See: Testing and Inspection/Component Tests and General
