ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Recall - Fuel Line Retainer Clip Installation|Page 4117 > < Recall - Fuel Line Retainer Clip Installation|Page 4115
Page 4
background image

SERVICE PROCEDURE

1.

Raise and support the vehicle.

CAUTION

Orientation of the fuel line clips is critical. The prongs on each clip should face away from the fuel tank. Do not cover the blue release tab of the fuel
fittings with the clips.

2.

Install a fuel line clip to the fuel supply line and return line fittings located in front of the fuel tank as follows.

^

Snap the lower end of a fuel line clip onto each of the fuel lines, then slide the legs of each clip into the end of the fuel line fitting. See Figure
1.

Recall - Fuel Line Retainer Clip Installation|Page 4117 > < Recall - Fuel Line Retainer Clip Installation|Page 4115