Crown Victoria V8-4.6L VIN W (2000)
8. Remove the fuel tank filler pipe.
1
Slide the fuel tank filler pipe into the tank enough to obtain clearance.
2
Rotate counterclockwise 1/2 turn and remove the fuel tank filler pipe.
CAUTION: Exercise care not to damage grommet or check valve at end of pipe.
NOTE: If unable to obtain sufficient clearance for removal, the tank straps may have to be loosened.
INSTALLATION
1. Install the fuel tank filler pipe in the fuel tank.
NOTE: Lubricate the fuel tank filler pipe end with petroleum meeting Ford specification ESW-M1C115-A or ESB-M1C99-A.
2. Install the dogpoint screw.
NOTE: Screw has a blunt end and must be used in this application.
3. Install the screws.
NOTE: Attach strap for cap at 4:00 o'clock position.