Crown Victoria V8-4.6L VIN W (2000)
Throttle Cable/Linkage: Description and Operation
The throttle is controlled by the accelerator cable which is connected to the accelerator pedal and shaft.
^
The accelerator pedal and shaft should travel smoothly from the idle to the wide-open throttle positions. Hesitation on return and/or prevention of
return to the idle position must not occur.
^
Surrounding components such as wiring, hoses, sound insulator and floor covering must not contact the sliding inner member of the accelerator
cable or the accelerator pedal and shaft.
^
The sliding inner member accelerator cable should not be lubricated and is not serviceable.
