Crown Victoria V8-4.6L VIN W (2000)
4.
Position the LCM aside.
a.
Remove the screws (Figure 2, Detail 1).
b.
Release the locking tab (Figure 2, Detail 2).
5.
Disconnect the electrical connectors and remove the LCM (Figure 3).
6.
To install, reverse the removal procedure. Check for correct operation.
OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES: 01-21-3
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
DEALER CODING
CONDITION
BASIC PART NO.
CODE