Crown Victoria V8-4.6L VIN W (2000)
Refer to the 2000 Crown Victoria and Grand Marquis workshop manual Group 5 Section 501 for wiper control module location and replacement
instructions.
INSPECTION PROCEDURE
The module must first be inspected for a green dot to determine if replacement is required. Modules that have a green dot have been updated at the
assembly plant and do NOT require replacement.
1.
Open the ashtray and look between the dash panel and the ashtray at the visible face of the wiper control module.
2.
Inspect the module for a green dot (sticker). If necessary, shine a flashlight from under the dash panel to illuminate the module. If the module has a
green dot, do not replace the module and return the vehicle to the customer. Replace the module if there is no green dot.
MODULE REPLACEMENT PROCEDURE
Refer to the 2000 Crown Victoria and Grand Marquis workshop manual Group 5 Section 501 for wiper control module replacement instructions.
Bracket Transfer
The module bracket must be transferred from the old module to the new module.The bracket is held in place by two round retaining buttons; depress the
buttons simultaneously and slide the bracket off the old module. The bracket will lock into place automatically when it is slid onto the new module.
