Crown Victoria V8-4.6L VIN W (2000)
Seat Belt Reminder Lamp: Description and Operation
Warning Devices
NOTE: The belt minder feature is configurable. If configuring using a scan tool, refer to Module Communications Network (Information Bus). To
configure without using a scan tool, refer to Belt Minder Deactivation/Activation.
The belt minder feature supplements the current safety belt warning function. The belt minder feature is enabled after the current safety belt warning is
complete. If the driver safety belt is not buckled approximately five seconds after the safety belt warning light has turned off, the belt minder reminds the
driver that their safety belt is unbuckled by intermittently sounding a chime and illuminating the safety belt warning lamp in the instrument cluster. While
activated, the belt minder alternates the chime and indicator from on for 6 seconds to off for 30 seconds.
The belt minder reminder stops when:
-
the driver safety belt is buckled.
-
the ignition is turned to OFF or ACC.
-
five minutes have elapsed since belt minder has started.