Crown Victoria V8-4.6L VIN W (2000)
Air Conditioning Switch: Service and Repair
REMOVAL
1. Remove the control assembly. For additional information, refer to Control Assembly-Manual A/C.
2. Remove the function selector.
1
Depress the snap tabs.
2
Remove the function selector.
NOTE: The knob will drop off as the function selector is removed.
3. Remove the temperature blend control switch.
1
Remove the screw.
2
Rotate and pull the temperature blend control switch.
NOTE: The knob will drop off as the temperature blend control switch is removed.
4. Remove the blower motor switch.
1
Depress the snap tabs.
2
Remove the blower motor switch.
NOTE: The knob will drop off as the blower motor switch is removed.
INSTALLATION
1. To install, reverse the removal procedure.
