Crown Victoria V8-4.6L VIN W (2000)
8. Remove the ABS sensor.
1
Remove the bolt.
2
Remove the ABS sensor.
9. Remove the stabilizer bar link from the front wheel spindle.
1
Remove the nut.
2
Remove the link.
10. Note: The lower control arm ball joint nut is coated with a dry adhesive and a new nut must be installed whenever the nut is loosened or removed.
Remove the lower ball joint nut. Discard the nut.
11. Remove the front wheel spindle.
1
Remove the pinch bolt and nut.
2
Raise the front suspension upper arm.
3
Remove the front wheel spindle.
12. Note: If a new front wheel spindle is to be installed, the wheel hub and bearing and the brake disc shield will have to be removed from the
spindle.
Remove the wheel hub and bearing.