Crown Victoria V8-4.6L VIN W (2000)
Pitman Arm: Service and Repair
Installation
Installation
1. Install the steering gear sector shaft arm.
1
Align the mark on the steering gear sector shaft arm with the alignment mark on the shaft.
2
Install the steering gear sector shaft arm.
3
Install a new lockwasher and nut. Do not tighten the nut.
2. Install the steering gear sector shaft arm onto the steering sector shaft arm drag link. Install the nut and a new lock nut.
3. Lower the vehicle.
4. Check the wheel alignment. Adjust as necessary.
