Crown Victoria V8-4.6L VIN W (2000)
7. Using the special tool, reinstall vacuum pump stopper and apply maximum vacuum.
8. CAUTION: Do not hold the steering wheel against the stops for more than three to rive seconds at a time. Damage to the power steering pump
will occur.
Cycle the steering wheel from stop to stop every 30 seconds for approximately five minutes.
9. Stop the engine, release the vacuum source, and remove vacuum pump.
10. Add power steering fluid if necessary. Install the power steering fluid reservoir cap.
11. CAUTION: Do not hold the steering wheel against the stops for more than three to rive seconds at a time. Damage to the power steering pump
will occur.
Start the engine and cycle the steering wheel from stop to stop every 30 seconds for approximately five minutes.
