Crown Victoria V8-4.6L VIN W (2000)
8. Remove the two driver air bag module bolts (one shown).
9. Disconnect and remove the driver air bag module.
1. Disconnect the driver air bag module electrical connector.
2. Disconnect the horn switch electrical connector.
3. Remove the driver air bag module.
10. Attach the restraint system diagnostic tool 418-F088 to the clockspring electrical connector at the top of the steering column.
11. Open the glove compartment and disconnect the glove compartment isolator.
12. Push in on the glove compartment door tabs and position downward.
13. Disconnect the passenger air bag module electrical connector.
14. Attach the restraint system diagnostic tool 418-F088 to the vehicle harness side of the passenger air bag module electrical connector.
