Crown Victoria V8-4.6L VIN W (2000)
3. Install the spacer.
4. Install the snap ring.
5. Note: Place the steering gear sector shaft dust seal on the special toot so the raised lip is toward the tool.
Using the special tool, install the sector shaft dust seal.
^
Lubricate the steering gear sector shaft dust seal; use Multipurpose Grease D0AZ-19584-AA or equivalent meeting Ford specifications
ESB-M1C93-B and ESR-M1C159-A.
^
Fill the space between the steering sector shaft dust seal and the sector shaft seal with Multipurpose Grease D0AZ-19584-AA or equivalent
meeting Ford specifications ESB-M1C93-B and ESR-M1C159-A.
6. Remove the steering gear housing from the special tool 307-003 (T57L-500-B).
7. Position the input shaft bearing in the valve housing. Using the special tool and a press, seat the input shaft bearing.
