Crown Victoria V8-4.6L VIN W (2000)
Wheel Bearing: Service and Repair
Special Tools
Special Tools
Removal
1. Remove the axle shaft.
2. CAUTION: Never remove the wheel bearing oil seal by itself. Always remove the wheel bearing oil seal and the rear wheel bearing at the
same time.
Note: If the wheel bearing oil seal is leaking, the axle housing vent may be plugged with foreign material.
Using the special tools, remove the rear wheel bearing and wheel bearing oil seal.
Installation
1. Lubricate the new rear wheel bearing.
-
Use SAE 80W-90 Premium Rear Axle Lubricant XY-80W90-QL or equivalent meeting Ford specification WSP-M2C197-A.