Crown Victoria V8-4.6L VIN W (2000)
Install the torque converter drain plug.
2. Install torque converter housing plug.
3. CAUTION: If installing a new filter, and the seal remains in the main control bore, carefully use a small screwdriver to remove the seal.
Use care not to damage the main control bore.
Note: If transmission is being serviced for a contamination-related failure, use a new filter and seal. The filter may be reused if no excessive
contamination is present.
Replace fluid filter and seal as required.
4. Position the (B) pan magnet into the (A) transmission fluid pan.
5. Note: The transmission fluid pan gasket is reusable, clean and inspect for damage; if not damaged, the gasket should be reused.
Install the transmission fluid pan and gasket.
