Crown Victoria V8-4.6L VIN W (2000)
Windshield Washer Reservoir: Service and Repair
REMOVAL
1. Remove the air cleaner assembly; refer to Fuel Delivery and Air Induction.
2. Position the pump and reservoir aside.
1
Remove the bolts.
2
Position the pump and reservoir aside.
3. Remove the washer pump and reservoir.
1
Disconnect the electrical connectors.
2
Disconnect the washer hose.
3
Remove the pump and reservoir.
WARNING: WINDSHIELD WASHER SOLUTION CONTAINS METHANOL WHICH IS POISONOUS. OBSERVE ALL CAUTIONS
AND WARNINGS INDICATED ON LABEL OF WASHER SOLUTION CONTAINER.
NOTE: Windshield washer fluid should be collected in a container after the windshield washer hose is disconnected.
4. Remove the washer pump.
INSTALLATION
1. To install, reverse the removal procedure.