E 100 Van V8-302 5.0L (1983)
Selector Shaft: Service and Repair
NOTE: To facilitate reassembly, note position of cams and shafts assemblies and levers before removal from transmission case.
Cams, Shafts & Levers
1. Remove three shift levers.
2. Remove three cams and shafts from inside of case.
3. Remove 0-ring from each cam and shaft.
4. Dip new 0-rings into gear lubricant and install them on cam and shafts.
5. Slide each cam and shaft into its respective bore in case.
6. Secure each shift lever.
