E 100 Van V8-351 5.8L (1982)
Engine Mount: Service and Repair
Fig. 6 Engine mounts. E-100---350 w/V8-302, 351W engine
V8-302 & 351W
E-100-350
1.
Remove fan shroud attaching bolts and the insulator-to-support nuts.
2.
Raise engine assembly and remove starter motor.
3.
Remove insulator attaching bolts, then the alternator splash shield and insulator, Fig. 6.
4.
Reverse procedure to install.
Fig. 9 Engine mounts. 1980---82 E-100---350 w/V8-351M, 400 engine
1980-82 E-100-350
1.
Remove fan shroud attaching bolts and the insulator-to-support nuts.
2.
Raise engine slightly and remove starter motor. When raised, the engine and transmission assembly will pivot around the rear engine mount.
The engine assembly must be lifted exactly two inches, measured from front mounts, and remain centered in the engine compartment. If
