ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Engine Controls - Hesitation/Loss Of/Low Idle RPM|Page 2606 > < Engine Controls - DTCs P0606/P0607/P0731 On Cold Start
Page 1
background image

Engine Control Module: All Technical Service Bulletins
Engine Controls - Hesitation/Loss Of/Low Idle RPM

TSB 10-17-7

09/13/10

4.6L AND 4R75E - HESITATION/LOSS OF RPM/LOW 
IDLE RPM DRIVABILITY CONCERNS

FORD:
2007-2008 E-150, E-250

ISSUE
Some 2007-2008 E-Series vehicles equipped with 4.6L engine and 4R75E transmission may exhibit hesitation/loss of RPM/low idle RPM drivability
concerns.

ACTION
Reprogram the powertrain control module (PCM) to the latest calibration using IDS release 68.01 and higher. This new calibration is not included in the
VCM 2010.7 DVD. Calibration files may also be obtained at the website.

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage 
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.

OPERATION

DESCRIPTION

TIME

101707A

2007-2008 Econoline 4.6L:

0.3 Hr.

Reprogram The PCM (Do
Not Use With Any Other
Labor Operations)

DEALER CODING

CONDITION

BASIC PART NO.

CODE

RECAL

04

Disclaimer

Engine Controls - Hesitation/Loss Of/Low Idle RPM|Page 2606 > < Engine Controls - DTCs P0606/P0607/P0731 On Cold Start