E 150 V8-4.6L SOHC VIN W (2004)
2. Install the brake pads.
1
Position the outboard brake pad anti-rattle spring, and slide the brake pad down until the retaining lugs are seated in the notch.
2
Position the inboard brake pad and seat the anti-rattle springs in the caliper pistons.
3. Coat the caliper locking keys and the caliper locking grooves with silicone brake caliper grease.
4. Tilt the rear disc brake caliper into the support bracket.
5. Start the caliper locking pin in the caliper locking groove.
