E 150 V8-4.6L SOHC VIN W (2004)
Brake Master Cylinder: Service and Repair
Master Cylinder, Hydro-Boost
Brake Master Cylinder Hydro-Boost
Removal and Installation
WARNING: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink
water and induce vomiting. Get medical attention immediately. Failure to follow these instructions may result in personal injury.
1. Disconnect the battery.
2. Use a suitable suction device to remove the brake fluid from the brake master cylinder reservoir.
3. Remove the coolant reservoir bolts and position the reservoir aside.
4. Disconnect the brake fluid level switch electrical connector.