E 150 V8-4.6L SOHC VIN W (2004)
Evaporator Case: Service and Repair
Removal and Installation
EVAPORATOR CORE HOUSING
REMOVAL
1. Remove the heater core housing.
2. Remove the evaporator core.
3. Detach the wire harness.
1
Remove the nut and stud.
2
Disconnect the electrical connector.
3
Disconnect the electrical connector and position the wire harness aside.
4. Remove the suction accumulator.
1
Remove the nuts.
2
Remove the suction accumulator.
5. Remove the washer reservoir.
1
Remove the nut.
2
Remove the bolt.
3
Remove the washer reservoir.
-
Disconnect the washer hose and washer pump electrical connector.