E 150 V8-4.6L SOHC VIN W (2004)
Housing Assembly HVAC: Service and Repair
Removal and Installation
PLENUM CHAMBER
REMOVAL
1. Remove the instrument panel. Refer to: Body and Frame, Interior Trim, Dashboard/Instrument Panel, Service and Repair, See: Body and
Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair
2. Disconnect the vacuum hose connector.
3. Disconnect the vacuum hose.
4. Remove the plenum chamber.
1
Remove the screws.
2
Remove the plenum chamber.
INSTALLATION
1. To install, reverse the removal procedure.