E 150 V8-4.6L SOHC VIN W (2004)
5. Remove the four clamps.
1
Remove the screw.
2
Remove the clamp.
6. Disconnect the underbody tube spring lock coupling.
-
Discard the O-ring seals.
All vehicles
7. CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
Disconnect the A/C evaporator core fitting.
1
Remove the screw.
2
Disconnect the A/C evaporator core fitting.
-
Discard the O-ring seal.
8. Remove the condenser-to-evaporator tubes.
INSTALLATION
1. To install, reverse the removal procedure.
-
Install new O-ring seals lubricated in clean mineral oil.
-
Lubricate the refrigerant system with the correct amount of clean PAG oil.
2. Evacuate, leak test and charge the A/C system.
