E 150 V8-4.6L SOHC VIN W (2004)
Install washers and a wheel nut on the wheel stud and tighten the wheel nut until the wheel stud seats against the flange.
Vehicles with semi-floating axle
2. NOTE: Do not use the wheel nut that came with the vehicle.
Install washers and a wheel nut on the wheel stud and tighten the wheel nut until the wheel stud seats against the flange.
3. Install the brake caliper and brake disc.
Vehicles with single wheel and full floating axle
4. Using the special tool, install the wheel stud.
5. Install the wheel hub.
