E 150 V8-4.6L SOHC VIN W (2004)
Throttle Cable/Linkage: Service and Repair
Accelerator Cable
ACCELERATOR CABLE
REMOVAL
All engines
1. Hold the accelerator pedal in place and disconnect the accelerator cable from the accelerator pedal and shaft.
2. Remove the accelerator cable from the bulkhead.
From inside the vehicle, compress the retaining tabs on the cable end and remove the cable from the bulkhead.
3. Remove the engine air cleaner (ACL) and outlet tube.
4. Depress the tab and remove the accelerator control splash shield.