E 150 V8-4.6L SOHC VIN W (2004)
13. NOTE: The power seat track is shown, the manual track is similar.
Remove the four bolts and separate the seat track with pedestal from the seat cushion assembly.
14. Separate the electrical connector and wire harness pin-type retainers from the seat.
15. Separate the wire harness pin-type retainer from the seat.
16. Remove the safety belt buckle and pretensioner.
1
Remove the bolt.
2
Separate the safety belt buckle and pretensioner.
3
Route out the wire harness and remove the safety belt buckle pretensioner.
INSTALLATION
