E 150 V8-4.6L SOHC VIN W (2004)
Seat Belt Retractor: Service and Repair
Retractor - Rear Safety Belt and Tongue
RETRACTOR - REAR SAFETY BELT AND TONGUE
Torx Bit, Safety Belt Bolt
SPECIAL TOOL(S)
REMOVAL
1. NOTE: Inspect the shoulder safety belt guide cover for damage. If the shoulder safety belt guide cover is damaged or if it does not remain closed,
install a new shoulder safety belt guide.
On a rear safety belt retractor and tongue with a flip-up shoulder safety belt guide cover, remove the shoulder safety belt guide as follows.
1
Lift the shoulder safety belt guide cover.
2
Use the Safety Belt Bolt Torx Bit to remove the bolt.
3
Remove the shoulder safety belt guide.
2. NOTE: Inspect the shoulder safety belt guide cover for damage. If the shoulder safety belt guide cover is damaged or if it does not remain closed,
install a new shoulder safety belt guide.
On a rear safety belt retractor and tongue without a flip-up shoulder safety belt guide cover, remove the shoulder safety belt guide as follows.
1
Position the shoulder safety belt cover aside.
2
Use the Safety Belt Bolt Torx Bit to remove the bolt.
3
Remove the shoulder safety belt guide.
3. On the LH second row rear safety belt retractor and tongue, remove the quarter trim finish panel, the body side rear center lower trim panel and the
quarter trim panel.
4. On the LH third, fourth and fifth row rear safety belt retractor and tongues, remove the quarter trim rear upper panel and the quarter trim rear
