E 150 V8-4.6L SOHC VIN W (2004)
2. Connect the intermediate shaft and turbine shaft combination speed sensor electrical connector.
Output Shaft Speed (OSS) Sensor
Output Shaft Speed (OSS) Sensor
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the output shaft speed (OSS) sensor.
3. NOTE: Prior to removing the speed sensor, make sure that the area around the sensor is free of debris to prevent contamination of the
transmission.
Remove the output shaft speed (OSS) sensor.
1. Remove the bolt.
2. Remove the output shaft speed (OSS) sensor.
Installation
1. Install the output shaft speed (OSS) sensor.
1. Lubricate the O-ring and install the OSS sensor.
2. Install the bolt.