E 150 V8-4.6L SOHC VIN W (2004)
Ignition Lock: Service and Repair
Ignition Lock Cylinder - Functional
IGNITION LOCK CYLINDER - FUNCTIONAL
REMOVAL
NOTE: When a new lock cylinder is installed, the door lock cylinder and ignition lock cylinder should be installed as a set. This eliminates carrying and
extra key which will fit only one lock. If a new key is used, the new key code number is stamped on a metal tag attached to the key.
1. Disconnect the battery.
2. Remove the ignition switch lock cylinder.
1
Turn the ignition to the ON position.
2
Using a suitable tool, press the ignition switch lock cylinder release pin while pulling out the ignition switch lock cylinder.
INSTALLATION
1. To install, reverse the removal procedure.
