E 150 V8-4.6L SOHC VIN W (2004)
Wiper Motor Linkage: Service and Repair
MOUNTING ARM AND PIVOT SHAFT
REMOVAL
1. NOTE: The windshield wiper mounting arm and pivot shaft (is replaced as an assembly.
Remove the windshield wiper pivot arms.
2. Remove the cowl top vent panels.
3. Disconnect the windshield wiper mounting arm and pivot shaft.
1
Remove the access cover from the dash panel.
2
Remove the retaining clip.
3
Disconnect the windshield wiper mounting arm and pivot shaft from the windshield wiper motor.
4. Remove the windshield wiper mounting arm and pivot shaft.
1
Remove the screws.
2
Remove the windshield wiper mounting arm and pivot shaft.
INSTALLATION
