E 150 V8-4.6L VIN W (2006)
Antenna, Radio: Service and Repair
ANTENNA
Removal and Installation
1. NOTE: Fixed mast type shown, 3-step telescoping type similar.
Remove the antenna mast from the antenna base.
2. Remove the antenna base.
1
Remove the radio antenna base cap.
2
Remove the 3 screws.
3
Lift the antenna base.
4
Disconnect the antenna lead-in cable from the antenna base and remove the antenna base.
3. Remove the fender splash shield.
1
Remove the 3 screws.
2
Remove the pushpin and the fender splash shield.
