E 150 V8-4.6L VIN W (2006)
18. Remove the coat hooks.
1
Remove the screw.
2
Remove the coat hook.
19. Remove the rear safety belt tongue and retractor assemblies upper attachments.
20. Remove the sliding door upper roller hinge trim cover, if equipped with the sliding door.
1
Remove the screw.
2
Remove the upper roller hinge trim cover.
21. Open the sliding door and loosen the sliding door upper garnish moulding, if so equipped.
22. NOTE: LH upper front body side trim panel shown, RH side similar.
Remove the upper body side trim panels at the headliner.
23. Remove the rear cargo lamp.
-
Disconnect the electrical connector at the B-pillar.
