E 150 V8-4.6L VIN W (2006)
9. Remove the safety belt retractor (extended wagon).
1
Remove the safety belt guide.
2
Using the special tool, remove the bolt.
-
To install, tighten to 48 Nm (35 lb-ft).
3
Remove the safety belt retractor.
10. Remove the upper rear body side trim panel.
1
Remove the pushpins.
2
Remove the upper rear trim panel.
11. Remove the upper front body side trim panel.
1
Remove the screw.
2
Remove the upper front trim panel.
12. Remove the lower rear body side trim panel (extended wagon).
1
Remove the 2 screws.