E 150 V8-4.6L VIN W (2006)
13. Remove the front seat backrest.
1. Remove the pivot bolt.
To install, tighten to 48 Nm (35 lb-ft).
2. Pull the lumbar cable through the seat cushion.
3. Lift and remove the backrest assembly.
14. To install, reverse the removal procedure.
Seat Backrest - Second Row, Bucket
SEAT BACKREST - SECOND ROW, BUCKET
Removal and Installation
NOTE: RH seat shown, LH seat similar.
1. Remove the detachable safety belt anchor buckle end.
1. Remove the detachable safety belt anchor buckle end bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
2. Remove the detachable safety belt anchor buckle end and spacer.
