E 150 V8-4.6L VIN W (2006)
-
To install, tighten to 40 Nm (30 lb-ft).
2. Remove the safety belt assembly.
4. NOTE: When removing the stanchions, note their locations on the seat cushion frame and install them in the same location.
Remove the left and right stanchions from the seat.
1. Remove the upper and lower stanchion-to-seat cushion frame bolts.
-
To install, tighten to 40 Nm (30 lb-ft).
2. Remove the stanchions from the seat.
5. Remove the center safety belt bolt and washer from the rear seat cushion frame and remove the center safety belt (4-passenger bench seat only).
-
To install, tighten to 40 Nm (30 lb-ft).
