ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Brake Pedal Position (BPP) Switch|Page 8954 > < Brake Pedal Position (BPP) Switch|Page 8952
Page 1
background image

Brake Switch (Cruise Control): Service and Repair

SPEED CONTROL DEACTIVATOR SWITCH

Removal

1. WARNING: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If

brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally,
drink water and induce vomiting. Get medical attention immediately. Failure to follow these instructions may result in personal injury.

CAUTION:
-

Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it
with water.

-

Make sure the master cylinder reservoir cap is secure before performing this procedure.

-

Do not allow any foreign matter to enter the master cylinder port once the deactivator switch is removed.

Disconnect the battery.

2. Remove the deactivator switch.

-

Disconnect the electrical connector.

Installation

Brake Pedal Position (BPP) Switch|Page 8954 > < Brake Pedal Position (BPP) Switch|Page 8952