E 150 V8-4.6L VIN W (2006)
16. Install the EGR valve tube.
^
Hand-tighten the upper and lower fittings.
^
Tighten to 50 Nm (37 ft. lbs.).
17. Connect the 2 differential pressure feedback EGR sensor vacuum hoses to the EGR valve tube.
All engines
18. NOTE: 4.6L shown, 5.4L similar.
Position the crankcase ventilation tube and connect the quick connect coupling to the valve cover. For additional information, refer to Fuel
Delivery and Air Induction.
19. Install the ACL and air cleaner outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.
20. Install the engine cover.
