E 150 V8-4.6L VIN W (2006)
All engines
8. Connect the coolant hose to the heater outlet tube.
9. Install the wiring retainers in the heater outlet tube bracket.
1
Install the KS electrical connector retainer.
2
Install the engine harness routing clip retainer.
10. Position the shield and install the retainers.
11. If servicing the RH engine support insulator, install the starter motor. For additional information, refer to Starting System.
12. Install the engine cooling fan and the fan shroud. For additional information, refer to Cooling System.
13. Install the intake manifold.
