E 150 V8-4.6L VIN W (2006)
C1-C2
Normal Operation
The RCM communicates with the diagnostic tool through the international standards organization (ISO) 9141 communications network, circuit 70
(LB/WH). Check circuit 70 (LB/WH) between the RCM C310a and the data link connector (DLC) C251. The total resistance value must not be more
than 5 ohms. If the resistance is more than 5 ohms there is an open in the ISO 9141 communications network circuit, damage to the DLC C251,
damage to the RCM C310a, or a problem in an in-line connector.
Possible Causes
-
ISO 9141 circuit 70 (LB/WH) open
-
RCM
Test D: The Anti-Lock Brake System (ABS) Module Does Not Respond To The Diagnostic Tool
PINPOINT TEST D: THE ANTI-LOCK BRAKE SYSTEM (ABS) MODULE DOES NOT RESPOND TO THE DIAGNOSTIC TOOL