E 150 V8-4.6L VIN W (2006)
10. NOTE: Passenger seat shown.
Remove the inboard side shield.
1
Rotate the inboard side shield upward to release the rear pin-type retainer.
-
Install a new pin-type retainer if damaged during removal.
2
Hold the inboard side shield in one hand and release the 2 retaining clips holding the safety belt buckle pretensioner boot to the inboard side
shield and remove the inboard side shield.
Seats without inboard side shield
11. Release the hook-and-loop strip on the inboard cushion flap.
12. Release the J-clip.